
| Casings and Closures | ||
| Description | Item# | Cost |
| 18mm closure set | 1-18-closure | 20.00 |
| 18mm 5 N-s case | 18-5case | 9.00 |
| 18mm 10 N-s case | 18-10case | 10.00 |
| 18mm 20 N-s case | 18-20case | 12.00 |
| 18mm 40 N-s case | 18-40case | 15.00 |
| 18mm 80 N-s case | 18-80case | 18.00 |
|
First purchase CLOSURE SET includes nozzle holder end closure, delay holder end closure, liner ejector dowel, spare o-rings, instructions. All other parts are separate components for replacement or special applications. Nozzle closure has positive seal in two places and recommended nozzle (included in reload packs) is reuseable at least three times. Bulkhead closure has positive seal in one place and standard friction fit delay element. Closure accepts small quantities of ejection powder in the well and 1/8g is recommended for MR. In particular the nozzle o-ring can be damaged by installation of nozzles so bevel the nozzle edge slightly with sandpaper to increase seal life. | ||

| 18mm - 0.685 inch - R&R Motor Reloads | ||||
| 18mm 5 Newton-second 0.25 Grain Reloads | ||||
| Motor Type | Thrust Pounds | Time Sec | Propellant | 6-pack Cost |
| 5 B 8 | 1.8 | 0.625 | Standard | 9.00 |
| 18mm 10 Newton-second 0.5 Grain Reloads | ||||
| Motor Type | Thrust | Time Sec | Propellant | 6-pack Cost |
| 10 C 16 | 3.6 | 0.625 | Standard | 9.00 |
| 18mm 20 Newton-second 1 Grain Reloads | ||||
| Motor Type | Thrust | Time Sec | Propellant | 6-pack Cost |
| 20 D 32 | 7.2 | 0.625 | Standard | 18.00 |
| 18mm 40 Newton-second 2 Grain Reloads | ||||
| Motor Type | Thrust | Time Sec | Propellant | 6-pack Cost |
| 40 E 64 | 14.4 | 0.625 | Standard | 36.00 |
|
18mm 80 Newton-second 4 Grain Reloads One graincore big. | ||||
| Motor Type | Thrust | Time Sec | Propellant | 3-pack Cost |
| 80 F 128 | 28.8 | 0.625 | Standard | 36.00 |
|
Includes propellant, delay, liner, nozzle, instructions. Consumer provides ejection powder FFF, igniter, rocket, launch pad and excitement! Bulk packs of 12 each available at 10% discount. Ask your dealer to stock our reloads and closures which are compatible with all popular casings. Our closures and loads, their casings. | ||||
Copyright 1980-2001 U.S. Rockets. All rights reserved.