and 38mm Series|
Stub 6 with 54mm and 2x38mm version
shortest rocket we could make with our giant 24 inch long
6 inch diameter
nose cone. The stock motor
mount is our
very versatile 66mm "Host Mount"-tm with two 29mm outer mounts. This
allows single or
cluster motor combinations to be used and accepts 54mm,
29mm, 4x24mm and 3x29mm "Interchange Mounts"-tm.
If you are looking for a versatile sport rocket,
this is the one. STUB 6 can accomodate H, I, J, K motors. Try
54mm I280, J250, K250 or 29mm H320.
can be slightly modified to
accept new dual deployment systems and altimeters. The nose
can be deployed or a payload tube can be added and
deployed on both sides of
the coupler or both sides of the payload tube.
|All U.S. Rockets 6 Inch and 38mm
feature feature pre-cut plywood
fins, heavy duty airframe tubes, strong recovery harness,
and flight instructions, decal and all the high quality
parts needed to
successfully assemble and fly a high power rocket.
parachutes, glue, sandpaper, sealer and paint not
included. Please Note: Parachutes
not included. Paint schemes for illustrations are the
artist's rendition and are done for graphic presentation
purposes only. Actual color schemes should be left to the
of the builder. At this advanced level the user is
expected to provide his
own parachutes, altimeter, and where appropriate
fiberglass layer. All
USR kits are dual deployment capable.