U.S. ROCKETS More power to you!! Genesis of LMR & HPR.
18mm Mass Market Series
MICRO-SENTRA SRB
MICRO-SENTRA SRB is a
micro-scale model of the wild U.S.
Rockets SENTRA SRB "in-flight pod release" rocket vehicle. MICRO-SENTRA SRB
uses fixed pods to simplify assembly and flight while maintaining the
distinctive appearance and cluster flight options! The
fins are numerous and beautiful.
Designed to accept
common Estes motors, MICRO-SENTRA SRB is able to be flown in single motor or
triple motor mode.
Parachute recovery brings your rocket home.
Try E9-6 and 2x B6-6.
MICRO-SENTRA SRB
can be slightly modified to
accept new dual deployment systems and altimeters. The payload
can be deployed on both sides of
the coupler or the payload tube. This rocket is
recomended for sport fliers who want to fly with easy electrical clustering.
It flies
surprisingly well on C11-5 and 2x A8-5.
Best flights are with
D12-7 and 2x B6-6. MICRO-SENTRA SRB has been successfully tested
with as
high of
power and thrust as 120G30-12. Its very strong and lightweight construction
makes
it fly surprisingly high
compared
to other rocket kit brands. Test it for yourself!
Most U.S. Rockets 18mm Mass Market
series kits
feature pre-cut fins, heavy duty airframe tubes, strong
shock
cord, illustrated assembly and flight instructions, and
all the high
quality parts needed to successfully assemble and fly a high
performance model
rocket. Launcher, motors, glue, sandpaper, sealer and paint not
included.
Micro-Sentra SRB kit package front.
Micro-Sentra SRB kit packageback.
Package.
Package.
Micro-Sentra SRB parts assortment
Micro-Sentra SRB kit fin patterns and marking
Micro-Sentra SRB kit fins cut to size
Micro-Sentra SRB pod motor mounts
Micro-shock cord attached
Pod shrouds and ejection passages cut to size
Shroud relief cuts not cut yet.
Micro-Sentra SRB launch lug alignment
Fin alignment using an ESTES fin alignment guide.
Micro-Sentra SRB kit fins cut to size with strakes attached.
Micro-Sentra SRB fins perforated in root with a pin to increase glue
strength.
Payload coupler with plate and screw eye.
29mm to 24mm conversion mount with tube
extended 1/2" and no thrust ring applied yet.
Sentra main body.
Overall completed view.
3x B6-4 flight.
Vented pod three cluster 18mm configuration.
Overall vehicle with igniters and "Cluster Wires"-tm in place.
