is a scale replica of the actual sounding rocket. The large
stable design makes ARCON excellect for large payload or sport
flights. Try an on-board camera in the large payload
compartment. Fly with 3 H120-8, J250-8, or K250-8. ARCON is a
very large but simple rocket which flys with low power motor
combos like 3 G60-4 or higher power I140-8 or J125-8. Altitudes
of 1000-3000 feet are common. It has a 98mm "Host Mount"-tm
which allows single motor high power flights when wanted. It
features our giant 24 inch long 6 inch diameter fiberglass nose
cone. The "Host Mount"-tm accepts 75mm, 54mm, 3x38mm, 7x29mm
"Interchange Mounts"-tm. If you are looking for a versatile
sport rocket, this is a good one. ARCON can accomodate H, I, J,
K, L, M motors.
can be slightly modified to
accept new dual deployment systems and altimeters. The payload
can be deployed on both sides of
the coupler or both sides of the payload tube.
|All U.S. Rockets 6 Inch
feature feature pre-cut plywood
fins, heavy duty airframe tubes, strong recovery harness,
and flight instructions, decal and all the high quality
parts needed to
successfully assemble and fly a high power rocket.
parachutes, glue, sandpaper, sealer and paint not
included. Please Note: Parachutes
not included. Paint schemes for illustrations are the
artist's rendition and are done for graphic presentation
purposes only. Actual color schemes should be left to the
of the builder. At this advanced level the user is
expected to provide his
own parachutes, altimeter, and where appropriate
fiberglass layer. All
USR kits are dual deployment capable.